I am not having much luck uploading to my web site. Whilst I can log on and view directories, and even delete a file I cannot upload. It just sits there looking at me! The time goes up, the rate comes down, hell of a job to get it to quit and then I find part of a file on the web site.
I am using a Netgear DG834 to connect to the web and have even set it to allow all incoming & outgoing to no avail.
If I use a straight ADSL modem to connect I can upload without any trouble.
Anyone know how to set the Netgear up as this must be the problem?
Tony
Netgear firewall
Hi, Yes PASV is checked. Nothing else is except SSL Listings & SSL Transfers are ticked and greyed out.
All Outbound services are allways allowed
Not sure about the third one so here is the log
Regards
Tony
Welcome to Core FTP, release ver 1.2f, build 1221 -- © 2003
WinSock 2.0
Mem -- 1,277,428 KB, Virt -- 2,097,024 KB
Started on Thursday April 01, 2004 at 17:51:PM
Resolving http://www.ashtechitsupport.co.uk...
Connect socket #656 to 193.22.244.19, port 21...
220 ProFTPD 1.2.8 Server (Web Mania) [server4.web-mania.com]
USER ahtechit
331 Password required for ahtechit.
PASS **********
230 User ahtechit logged in.
SYST
215 UNIX Type: L8
Keep alive off...
PWD
257 "/" is current directory.
PASV
227 Entering Passive Mode (193,22,244,19,226,177).
LIST
Connect socket #692 to 193.22.244.19, port 58033...
150 Opening ASCII mode data connection for file list
226 Transfer complete.
Transferred 4,494 bytes in 0.297 seconds
PWD
257 "/" is current directory.
TYPE I
200 Type set to I
PASV
227 Entering Passive Mode (193,22,244,19,226,181).
STOR Cold Scrolling.doc
Connect socket #712 to 193.22.244.19, port 58037...
150 Opening BINARY mode data connection for Cold Scrolling.doc
150 Opening BINARY mode data connection for Cold Scrolling.doc
MDTM Cold Scrolling.doc
All Outbound services are allways allowed
Not sure about the third one so here is the log
Regards
Tony
Welcome to Core FTP, release ver 1.2f, build 1221 -- © 2003
WinSock 2.0
Mem -- 1,277,428 KB, Virt -- 2,097,024 KB
Started on Thursday April 01, 2004 at 17:51:PM
Resolving http://www.ashtechitsupport.co.uk...
Connect socket #656 to 193.22.244.19, port 21...
220 ProFTPD 1.2.8 Server (Web Mania) [server4.web-mania.com]
USER ahtechit
331 Password required for ahtechit.
PASS **********
230 User ahtechit logged in.
SYST
215 UNIX Type: L8
Keep alive off...
PWD
257 "/" is current directory.
PASV
227 Entering Passive Mode (193,22,244,19,226,177).
LIST
Connect socket #692 to 193.22.244.19, port 58033...
150 Opening ASCII mode data connection for file list
226 Transfer complete.
Transferred 4,494 bytes in 0.297 seconds
PWD
257 "/" is current directory.
TYPE I
200 Type set to I
PASV
227 Entering Passive Mode (193,22,244,19,226,181).
STOR Cold Scrolling.doc
Connect socket #712 to 193.22.244.19, port 58037...
150 Opening BINARY mode data connection for Cold Scrolling.doc
150 Opening BINARY mode data connection for Cold Scrolling.doc
MDTM Cold Scrolling.doc
CP you are a star! I had checked the Netgear website but whilst I might have read the article I doubt I realised that it was describing my problem. I have a call into them as well but have not had a reply. It is also annoying because usually the first thing I do when I buy a new bit of kit is upgrade to the latest version of firmware. Not sure why I didn't this time.
Whatever, the problem is fixed and I thank you very much.
Regards
Tony
Whatever, the problem is fixed and I thank you very much.
Regards
Tony